Configuration
z
Highlight the box beside Baud Rate of the RS232 field and press the
button.
A list of baud rates ranging from 300 to 115,200 appears.
z
Highlight the box beside Parity of the RS232 field and press the
button. A
drop-down list appears. You can select from None, Odd or Even parity.
z
Highlight the box beside Data Bit of the RS232 field. Pressing the
button
toggles between 7 bit and 8 bit formats.
z
Highlight the box beside Stop Bit of the RS232 field. Pressing the
button
toggles between 1 and 2 Stop Bits.
z
You can save your changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
3.10.3 Callback Center (LAN) Setup Screen
Fig. 63
Callback Center (LAN) Setup screen.
z
The DVR can be set to contact a computer running RAS (Remote Administration
System) or send an e-mail on a LAN when an event occurs.
z
Highlight the box beside IP Address and enter the IP address of the computer
you want contacted during an event.
z
Highlight the box beside Retry and enter the number of times you would like the
DVR to try contacting the computer. You can select from 1 to 10 retries.
z
Highlight the box beside E-mail notification and press the
button to toggle
between On and Off.
z
Highlight the box beside SMTP Server IP and enter the SMTP server IP address,
obtained from your system administrator.
z
Highlight the box beside E-mail recipient and enter the recipient’s e-mail address.
Use the virtual keyboard to enter the e-mail address.
z
Highlight the box beside E-mail sender and enter the sender’s e-mail address.
NOTE
:
The e-mail address must include the character “@” to be a valid address.
60
Siemens Building Technologies
SISTORE AX9 AX16_EN.doc
Fire & Security Products
09.2004