Siemens SISTORE AX16 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 92

Siemens SISTORE AX16 Скачать руководство пользователя страница 35

Configuration

3.5.5

System Log Screen

Highlight System Log in the Main menu and press the

button. The System Log

screen appears.

Fig. 32

System Log screen.

The System Log screen displays a record of various events logged by the DVR.
The list shows the dates and times the system was turned ON and OFF, power
failed, recording was started or stopped, playback was started or stopped, setup
changes were made, and data banks were cleared.

The events are listed from the most recent to the oldest. You can scroll through
the list a page at a time by selecting the Up and Down arrow buttons and pressing
the

button. You can go directly to an event number by highlighting the event

number box (left of the UP arrow), pressing the

button, using the arrow buttons

to change the number, and pressing the

button.

3.5.6 System

Shutdown

Highlight System Shutdown in the Main menu and press the

button. This shuts

the DVR down. When shutting down the DVR, you need to confirm that you want
shut down the unit, and you will be asked for an administrator password.

35

Siemens Building Technologies

SISTORE AX9 AX16_EN.doc

Fire & Security Products

09.2004

«
...
33
34
35
36
37
...
»

Содержание SISTORE AX16





























































































Отзывы:

Нет отзывов