manualshive.com logo in svg

Siemens SISTORE AX16, Руководство пользователя, Страница: 22 / 92

Поделиться
Скачать
Siemens SISTORE AX16 Скачать руководство пользователя страница 22

Configuration 

3.1.5 Sequence 

Button 

 

When in the live mode, pressing the Sequence button displays another full live 
channel sequentially.  When in one of the multi-view formats, pressing this button 
will cause the DVR to sequence cameras in two sequence modes: “Page” and 
“Cameo”.  In the Page mode, the DVR sequences through user-defined screen 
layouts (pages).  In the Cameo mode, the bottom, right screen to display live 
cameras sequentially.  Pressing the Sequence button while in the Sequence mode 
will exit the Sequence mode.  Zooms Out in PTZ mode. 
 

3.1.6 Display 

Button 

 

Pressing the Display button toggles between different display formats.  The 
available formats are: full, 4 x 4, 3 x 3, 2 x 2 and PIP.  Zooms In in PTZ mode. 
 

3.1.7 PTZ 

Button 

 

Pressing the PTZ button opens a Pan/Tilt/Zoom screen which allows you to control 
properly configured cameras. 
 

3.1.8 Freeze 

Button 

 

Pressing the Freeze button freezes the current live screen.  Used for near Focus in 
the PTZ mode. 
 

3.1.9 Alarm 

Button 

 

The Alarm button has two functions.  First, it will reset the DVR’s outputs including 
the internal buzzer during an alarm.  Second, it will display the event log when you 
are in the live monitoring mode unless there is an active alarm.  This operation can 
be user password protected.  Used for far Focus in PTZ mode. 
 

3.1.10 Spot 

Button 

 

Pressing the Spot button and pressing the individual camera buttons displays the 
selected camera on the spot monitor.  For the sequence display on the spot 
monitor, press the Spot button and then Sequence button.  Saves Presets in PTZ 
mode.  
 

3.1.11 Menu 

Button 

 

Pressing the Menu button enters the Quick Setup screen.  You will need to enter 
the administrator password to access the Quick Setup.  Pressing the button also 
closes the current menu or setup dialog box.  Pressing the MENU button displays 
the Search menu while in the Playback mode.  Pressing the button again closes 
the Search menu.  Loads a Preset View in PTZ mode. 
 

22

 

Siemens Building Technologies

 

 

SISTORE AX9 AX16_EN.doc

Fire & Security Products 

 

09.2004

 

 

Содержание SISTORE AX16





























































































Отзывы:

Нет отзывов