Siemens SISTORE AX16 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 92

Siemens SISTORE AX16 Скачать руководство пользователя страница 15

Installation

2.7 Connecting

Audio

NOTE

:

It is the user’s responsibility to determine if local laws and regulations permit recording audio.

Fig. 7

Audio In and Out connectors.

Your DVR can record audio. Connect the audio source to Audio In. Connect
Audio Out to your amplifier.

NOTE

:

The DVR does not have amplified audio output, so you will need a speaker with an amplifier. The
audio input can be from an amplified source or directly from a microphone.

2.8 Connecting

Alarms

Fig. 8

Alarm Input/Output and RS485 connector

Fig. 9

Alarm Input/Output board and alarm connector strips

An Alarm I/O port (DB-25 male connector) is provided to connect the alarm inputs
and alarm outputs. Connect the wires to connectors on the Alarm I/O board
(supplied with the unit), and then connect the board to the Alarm I/O port.

CAUTION

Do not attempt to wire directly to the DB-25 male connector.

NOTE

:

The Alarm I/O Board consists of alarm connector strips and RS485 connector.

15

Siemens Building Technologies

SISTORE AX9 AX16_EN.doc

Fire & Security Products

09.2004

«
...
13
14
15
16
17
...
»

Содержание SISTORE AX16





























































































Отзывы:

Нет отзывов