Configuration
3.10 Network Setup Screen
In the Network Setup screen you can set up the DVR for LAN connections.
Fig. 60
Network Setup screen.
z
Highlight the box beside Connection. Press the
button to toggle between
LAN and Modem.
z
Highlight the box beside Admin Password and press the
button. A virtual
keyboard appears. You will first be asked to enter the current password. Then
you can enter a new password; you will be asked to confirm the new password
before it is accepted.
z
Highlight the box beside User Password and press the
button. A virtual
keyboard appears. You will first be asked to enter the current password. Then
you can enter a new password; you will be asked to confirm the new password
before it is accepted.
NOTE
:
These passwords are for network use. They are different from the Admin and User passwords for the
DVR itself.
NOTE
:
The passwords are case sensitive. The factory default password for both Administrator and User is
12345678
.
CAUTION
Write the password down and keep it in a safe place. Once the password has
been reset, the default will no longer work. If the password is forgotten, the unit
must be reset using the
Factory Reset Button
and all data settings will be lost.
z
Highlight the box beside Transfer Control. Press the
button to toggle
between On and Off. When On, you can set the transfer speed and remote
quality of the image transferred to a computer running RAS (Remote
Administration System).
z
Highlight the box beside Transfer Speed and press the
button. Select the
transfer speed from 1 to 25 ips for PAL (1 to 30 ips for NTSC).
NOTE
:
When the Record Quality is set to High during the Record Mode setup, the transfer speed can be set
from 1 to 10 ips for PAL (1 to 15 ips for NTSC).
NOTE
:
The transfer speed you set is the maximum speed. Depending on the network environment, this
speed may not be achieved.
57
Siemens Building Technologies
SISTORE AX9 AX16_EN.doc
Fire & Security Products
09.2004