Siemens SISTORE AX16 Скачать руководство пользователя страница 59

Страница: 59 / 92

Configuration

The factory default LAN settings are:
DHCP:

Off

Address: 192.168.1.129

Gateway:

192.168.1.254

Subnet

Mask: 255.255.255.0

The factory default IP Port settings are:
Admin:

8200

Watch:

8016

Search:

10019

Callback:

8201

NOTE

Do NOT use the same IP port number for two different programs; otherwise, the DVR cannot be
connected with a PC running RAS.

CAUTION

When changing the IP port settings, you must change the IP port settings on a
PC running RAS as well. Refer to the RAS manual for details.

You can save your changes and return to the Network Setup screen by highlighting
OK and pressing the

button. Selecting Cancel exits the screen without saving

the changes.

3.10.2 Modem Setup

Fig. 62

RS232/RS485 setup screen.

NOTE:

Modem setup is done through the

RS232/RS485

screen in the Devices menu, which can be accessed

from the Main Menu.

NOTE:

If the RS232 port is in use for the remote control, the networking cannot be configured by the modem.
In the

RS232/485 Setup

menu, set up the RS232 port to communicate with the external modem first.

Siemens Building Technologies

SISTORE AX9 AX16_EN.doc

Fire & Security Products

09.2004

Содержание SISTORE AX16





























































































Результаты поиска

Содержание SISTORE AX16

Отзывы:

Siemens SISTORE AX16, Руководство пользователя, Страница: 59 / 92

Результаты поиска

Содержание SISTORE AX16

Отзывы: