Siemens SIRIUS 3RW51, Руководство по эксплуатации оборудования

Страница: 113 / 210

Operating principle
The process image input (PII) contains current information about the soft starter and process
state. The process image output (PIQ) contains current control commands to the 3RW5 soft
starter. The control command states of the control source, which has control priority according
to the operating mode controller, are entered in the data memory of the process image output.
Display of the process images on the 3RW5 HMI High Feature
In the process image of the input (PII) and process image output (PIQ), you can see which bits
of the process image are active or inactive.
Checkbox Status Bit
inactive 0
active 1
Additional information
You will find further information on transferring the process images via a fieldbus in the device
manual for the respective 3RW5 communication module.
Process image input (PII)
Process data Process image
DI 0.0 Ready (automatic)
DI 0.1 Motor On
DI 0.2 Group error
DI 0.3 Group warning
DI 0.4 Input 1
DI 1.0 Motor current Iact-bit0
DI 1.1 Motor current Iact-bit1
DI 1.2 Motor current Iact-bit2
DI 1.3 Motor current Iact-bit3
DI 1.4 Motor current Iact-bit4
DI 1.5 Motor current Iact-bit5
DI 1.6 Operating mode manual - local
DI 1.7 Ramp operation
DI 2.0 Motor CW
DI 2.4 Starting mode active
DI 2.5 Operation / bypass active
DI 2.6 Stopping mode active
DI 2.7 Test mode active
1)
DI 3.2 Switching element overload
DI 3.3 Cooling time active
DI 3.4 Device error
Functions
8.12 3RW5 HMI High Feature
SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
113