Siemens SINAMICS G180, Инструкция по установке и эксплуатации

Страница: 27 / 218

Safety information
2.10 Components that can be destroyed by electrostatic discharge (ESD)
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
25
To protect your equipment against damage, follow the instructions given below.
● Avoid physical contact with electronic components. If it is essential that you perform work
on these components, you must wear one of the following pieces of protective gear:
–
Grounded ESD wrist strap
– ESD shoes or ESD shoe grounding strips if there is also an ESD floor.
● Do not place electronic components close to data terminals, monitors or televisions.
Maintain a minimum clearance to the screen (> 10 cm).
● Electronic components should not be brought into contact with electrically insulating
materials such as plastic foil, plastic parts, insulating table supports or clothing made of
synthetic fibers.
● Bring components into contact only with ESD-compliant materials, e.g. ESD tables, ESD
surfaces, ESD packaging.
● Only carry out measurements on the components if one of the following conditions is met:
–
The measuring device is grounded with a protective conductor, for example.
– The measuring head of a floating measuring device has been discharged directly
before the measurement.
The necessary ESD protective measures for the entire working range for electrostatically
sensitive devices are illustrated once again in the following drawings.
Precise instructions for ESD protective measures are specified in the standard
DIN EN 61340-5-1.
a = Conductive floor covering
1)
b = ESD furniture
c = ESD shoes or ESD shoe grounding strips
2)
d = ESD clothing
e = ESD wrist strap f = Cabinet ground connection
1)
Only effective in conjunction with ESD shoes or ESD shoe grounding strips
2)
Only effective in conjunction with conductive floor covering
Figure 2-2 ESD information