Siemens SIMATIC NET SCALANCE W740 Series Скачать руководство пользователя

Страница: 452 / 456

Appendix D

D.2 Messages in the WLAN Authentication Log

SCALANCE W780/W740 to IEEE 802.11n Web Based Management

452

Configuration Manual, 08/2018, C79000-G8976-C267-13

D.2

Messages in the WLAN Authentication Log

Messages in access point mode

Alarm

Description

Client <MAC address> <system name> associated suc-

cessfully.

The client has logged in successfully on the access point.

Client <MAC address> <system name> disassociated

with reason <reason description>

The client was logged off from the access point.

VAP<Num>: Client <MAC> failed to associated; status

(<text>)

The connection of the client to the VAP has failed. The reason

is displayed as text.

VAP<Num>: Client <MAC> disassociated with reason

(<text>)

The client was successfully disconnected from the VAP. The

reason is displayed as text.

VAP<Num>: Client <MAC>deauthenticated with reason

(<text>)

The client was logged off from the AP. The reason is displayed

as text.

VAP<number> Client <MAC> failed to authenticate; sta-

tus (<status>)

The authentication of the client failed. The reason is displayed

as text.

VAP<Num>: Client <MAC> failed to disassociated; status

(<text>)

The connection of the client could not be terminated. The rea-

son is displayed as text.

VAP<Num>: Client <MAC> associated successfully

The client has connected successfully to the VAP or the client

has logged on successfully to the VAP.

RADIUS: Access rejected for client <MAC>

The RADIUS server denies the client access.

RADIUS: Access accepted for client <MAC>

The RADIUS server allows the client access.

WDS Connection is established to AP <MAC>

The WDS connection is successfully established to the access

point.

WDS disconnect from AP <MAC>

The WDS connection to the access point is terminated.

Messages in client mode

Alarm

Description

Associated successfully to AP <MAC address> <system

name> at channel <channel number> (frequency <fre-

quency> MHz)

The client has logged in successfully on the access point.

Disassociated from AP <MAC address> <'sys name'>

with reason (Disassociated because sending STA is leav-

ing (or has left) BSS)

The client was logged off from the access point.

Failed to authenticate to AP <MAC>; status (<Text>)

The authentication of the client with the access point failed.

The reason is displayed as text.

Failed to disassociate from AP <MAC>; status (<Text>)

The connection of the client to the access point could not be

terminated. The reason is displayed as text.

Failed to associate to AP <MAC>; status (<Text>)

The connection of the client to the access point has failed. The

reason is displayed as text.

Содержание SIMATIC NET SCALANCE W740 Series









































































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE W740 Series, Руководство по настройке

Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды