Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
214
Configuration Manual, 08/2018, C79000-G8976-C267-13
Description
The table has the following columns:
●
Client Type
Select the client type for which you want to make settings:
–
E-mail
Sending system event messages by e-mail
–
Log Table
Entry of system events in the log table
–
Syslog
Entry of system events in the Syslog file
–
WLAN Authentication Log
Entry of system events in the WLAN authentication log
●
Severity
Select the required level. The following settings are possible:
–
Critical
System events are processed as of the severity level "Critical".
–
Warning
System events are processed as of the severity level "Warning".
–
Info
System events are processed as of the severity level "Info".
Procedure
Follow the steps below to configure the required level:
1.
Select the required values from the drop-down lists of the second table column after the
client types.
2.
Click the "Set Values" button.
6.5.10
SMTP Client
Network monitoring with e-mails
The device provides the option of automatically sending an e-mail if an alarm event occurs
(for example to the network administrator). The e-mail contains the identification of the
sending device, a description of the cause of the alarm in plain language, and a time stamp.
This allows centralized network monitoring to be set up for networks with few nodes based
on an e-mail system. When an e-mail error message is received, the WBM can be started by
the Internet browser using the identification of the sender to read out further diagnostics
information.
