Siemens SIMATIC NET SCALANCE W740 Series Скачать руководство пользователя

Страница: 42 / 456

Security recommendations

SCALANCE W780/W740 to IEEE 802.11n Web Based Management

Configuration Manual, 08/2018, C79000-G8976-C267-13

●

Use a central logging server to log changes and access operations. Operate your logging

server within the protected network area and check the logging information regularly.

●

Use WPA2/ WPA2-PSK with AES to protect the WLAN. If iPCF or iPCF-MC is used, use

the AES encryption.

Passwords

●

Define rules for the use of devices and assignment of passwords.

●

Regularly update passwords and keys to increase security.

●

Change all default passwords for users before you operate the device.

●

Only use passwords with a high password strength. Avoid weak passwords for example

password1, 123456789, abcdefgh.

●

Make sure that all passwords are protected and inaccessible to unauthorized personnel.

●

Do not use the same password for different users and systems or after it has expired.

Keys and certificates

This section deals with the security keys and certificates you require to set up HTTPS

(HyperText Transfer Protocol Secured Socket Layer).

●

We strongly recommend that you create your own HTTPS certificates and make them

available.
There are preset certificates and keys on the device. The preset and automatically

created HTTPS certificates are self-signed.
We recommend that you use HTTPS certificates signed either by a reliable external or by

an internal certification authority. The HTTPS certificate checks the identity of the device

and controls the encrypted data exchange. You can install the HTTPS certificate via the

WBM (System > Load and Save).

●

Handle user-defined private keys with great caution if you use user-defined SSH or SSL

keys.

●

Use the certification authority including key revocation and management to sign the

certificates.

●

Verify certificates and fingerprints on the server and client to avoid "man in the middle"

attacks.

●

We recommend that you use certificates with a key length of 2048 bits.

●

Change keys and certificates immediately, if there is a suspicion of compromise.

Содержание SIMATIC NET SCALANCE W740 Series









































































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE W740 Series, Руководство по настройке

Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды