Siemens SIMATIC NET SCALANCE W740 Series Скачать руководство пользователя

Страница: 238 / 456

Configuring with Web Based Management

6.5 "System" menu

SCALANCE W780/W740 to IEEE 802.11n Web Based Management

238

Configuration Manual, 08/2018, C79000-G8976-C267-13

●

State
Shows the status of the entry:
–

Enabled
The entry was created correctly.

–

Invalid
The entry was created new and the start and end date are identical.

●

Type
Shows how the daylight saving time changeover is made:
–

Date
A fixed date is entered for the daylight saving time changeover.

–

Rule
A rule was defined for the daylight saving time changeover.

Procedure

Creating an entry
1.

Click the "Create" button.
A new entry is created in the table.

Click on the required entry in the "DST No column.
You change to the "DST Configuration" page.

Select the required type in the "Type" drop-down list.
Depending on the selected type, various settings are available.

Enter a name name in the "Name" box.

If you have selected the type "Date", fill in the following boxes.
–

Year

–

Day (for start and end date)

–

Hour (for start and end date)

–

Month (for start and end date)

If you have selected the type "Rule", fill in the following boxes.
–

Hour (for start and end date)

–

Month (for start and end date)

–

Week (for start and end date)

–

Day (for start and end date)

Click the "Set Values" button.

Содержание SIMATIC NET SCALANCE W740 Series









































































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE W740 Series, Руководство по настройке

Результаты поиска

Содержание SIMATIC NET SCALANCE W740 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE W740 Series

Бренды по названию

Популярные бренды