Siemens SIMATIC NET 6GK5766-1GE00-3DA0, Руководство по эксплуатации

Страница: 41 / 82

Assembly and disassembly
5.3 Wall mounting
SCALANCE WxM766
Operating Instructions, 03/2022, C79000-G8976-C617-03
41
Note
Installation in the upward position when using the device according to UL
Operation in the upward position (e.g. desktop operation) has not been tested according
to UL for this device and is therefore not permitted.
5.3 Wall mounting
Note
Depending on the mounting surface, use suitable fittings.
Note
The wall mounting must be capable of supporting at least four times the weight of the
device.
To mount the device on a wall, follow the steps below:
1.
Prepare the drill holes for wall mounting. For the precise dimensions, refer to the
section "Dimension drawing (Page 75)".
2. Secure the device to the wall with four screws. The screws are not supplied with the
device.
3. Connect the power supply, refer to the section "Power supply (Page 55)".
4. Fit the antennas, refer to the section "Antennas (Page 58)".
5.4 Mounting on VESA bracket
For mounting the device on the VESA 75 x 75 mm wall holder, 4x M4 threaded holes with
a thread depth of 8.5 mm are provided on the back of the device, see the "Dimension
drawing (Page 75)" section. The wall holder and M4 screws are not included in the scope
of delivery of the device.
Note
The wall mounting must be capable of supporting at least four times the weight of the
device.
To install the device on the wall holder, follow the steps below:
1.
Screw the device to the wall holder with four M4 screws.
2. Connect the power supply, refer to the section "Power supply (Page 55)".
3. Fit the antennas, refer to the section "Antennas (Page 58)".