Siemens SENTRON PAC2200CLP Скачать руководство пользователя страница 90

Страница: 90 / 130

Technical specifications

8.1 Technical specifications

PAC2200CLP

Equipment Manual, 06/2021, L1V30820585B-02

•

Use of the communications interfaces

The communications interfaces of the counters are not in conformance with statutory

calibration regulations. Measured values of the counters to be approved here which are

read out over these interfaces can only be used for billing purposes insofar as, in

accordance with Annex 2, Paragraph 8.1 of the Metering and Calibration Act, they

constitute an unchanged repetition of the measurement results shown on the display of

the counters to be approved here.

•

Logbook function

The counters described here always feature a calibration logbook which can only be

deleted if the access protection provided by the manufacturer is impaired.

Содержание SENTRON PAC2200CLP



































































































































Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы:

Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 90 / 130

Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы: