Siemens SENTRON PAC2200CLP Скачать руководство пользователя страница 12

Страница: 12 / 130

Introduction

1.5 Advanced training courses

PAC2200CLP

Equipment Manual, 06/2021, L1V30820585B-02

Siemens AG

Smart Infrastructure

Electrical Products

Technical Support

Postfach 10 09 53

93009 Regensburg

Germany
You will find Technical Support under.
Keyword: Open Source Request (please specify Product name and version, if applicable)
SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.

Warranty regarding further use of the Open Source Software

SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS does

not provide any warranty or technical support for this Product or any OSS components

contained in it if they are modified or used in any manner not specified by SIEMENS. The

license conditions may contain disclaimers that apply between you and the respective

licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment on

behalf of or binding upon any third-party licensor. The Open Source Software used in the

product and the license agreements concerning this software can be found in the

Readme_OSS.

See also

Industry Online Support (

https://support.industry.siemens.com/cs/us/en/ps

)

www.opensource.org (

http://www.opensource.org

)

1.5

Advanced training courses

Find out about training courses on offer on the following link.
Training for Industry (

https://www.siemens.com/sitrain-lowvoltage

)

Here you can choose from:
•

Web-based training courses (online, informative, free)

•

Classroom training courses (course attendance, comprehensive, subject to fee)

You also have the possibility of compiling your own training portfolio via

Learning paths

Содержание SENTRON PAC2200CLP



































































































































Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы:

Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 12 / 130

Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы: