Siemens SENTRON PAC2200CLP Скачать руководство пользователя страница 49

Страница: 49 / 130

Connection

4.4 Connecting the communication cable

PAC2200CLP
Equipment Manual, 06/2021, L1V30820585B-02

•

Be careful not to damage the foil shield of the cable when removing the cable jacket.
Fasten the exposed shield with a metal cable clamp or alternatively with a hose tie. The

clamp must clasp around a large portion of the shield and provide good contact.

•

To allow good contact, a tin-plated or galvanically stabilized surface is ideal. With a

galvanized surface, the contact should be achieved using suitable screws. A painted

surface at the contact point is not suitable.

NOTICE
Loss of contact if the shield connection is incorrectly used for strain relief

If the shield connection is used for strain relief, the grounding contact can deteriorate or be

completely lost.
Do not use the contact point on the cable shield for strain relief.

Содержание SENTRON PAC2200CLP



































































































































Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы:

Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 49 / 130

Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы: