Siemens SENTRON PAC2200CLP Скачать руководство пользователя страница 48

Страница: 48 / 130

Connection

4.4 Connecting the communication cable

PAC2200CLP

Equipment Manual, 06/2021, L1V30820585B-02

4.4

Connecting the communication cable

4.4.1

Ethernet communication cable

Always use a shielded cable for the Ethernet data cable.
1. Plug the RJ45 cable connector into the RJ45 device socket until the connector engages in

the socket.
2. Provide sufficient mechanical strain relief for the Ethernet cable.
3. Ground the cable shield.

4.4.2

Grounding of the Ethernet cable

NOTICE
The upper limit values will be violated if the cable is not grounded

Compliance with the technical limit values for noise radiation and noise immunity is only

guaranteed if the cable is correctly grounded. The operator of the system is responsible for

ensuring compliance with the statutory limit values (CE mark).
Make a shield connection as described here.

Implementation

Ground the Ethernet cable in the vicinity of the PAC2200CLP power monitoring device. To do

this, expose the foil shield of the cable. Connect the exposed shield to a suitable grounding

point on the control cabinet, preferably a shielding bus.

Содержание SENTRON PAC2200CLP



































































































































Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы:

Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 48 / 130

Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы: