Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 68 / 130

Commissioning
6.3 Parameterizing the device
PAC2200CLP
66
Equipment Manual, 06/2021, L1V30820585B-02
Selection Range Factory setting
SNTP Protocol is used for transmitting and synchronizing the
time.
•
OFF:
SNTP function not active
• ACTIVE:
The device automatically requests the time from
the NTP server.
• BCST client:
The device receives time telegrams
which are sent from an NTP server.
OFF
IP
(only when SNTP is
activated)
If an SNTP IP address is configured, only data from this
IP address is accepted.
0.0.0.0
SNTP STATUS OK
(only when SNTP is
activated)
• ACTIVE:
SNTP server is available
• NOT ACTIVE:
SNTP server is unavailable
–
"Integrated I/O" parameter
"Digital input" parameter
The following functions can be assigned to the "Digital input" parameter:
•
Tariff switching for two-tariff, active energy, and reactive energy counters.
Selection Range Factory setting
ACTION
• NONE:
Input is deactivated.
• PULSE INPUT:
Counting of input pulses
• HT/LT SWITCHING :
Switching between tariffs. Low tariff if input active.
• DISPLAY:
Backlighting. Backlighting ON, if input is active.
NONE
UNIT The "UNIT" property is only visible if "PULSE INPUT" is
set for the "ACTION".
Countable unit with pulse counting:
•
Active energy (kWh)
• Reactive energy (kvarh)
—
PULSES PER UNIT The "PULSES PER UNIT" property is only visible if "PULSE
INPUT" is set for the "ACTION".
Range: 1 to 4000
1
PRO
(input pulse divider)*
The "PULSES PER UNIT" property is only visible if "PULSE
INPUT" is set for the "ACTION".
Range: 1; 10; 100; 1000
1