Siemens SENTRON PAC2200CLP Скачать руководство пользователя страница 10

Страница: 10 / 130

Introduction

1.2 Latest information

PAC2200CLP

Equipment Manual, 06/2021, L1V30820585B-02

General safety notes

DANGER

Hazardous voltage.

Will cause death, serious personal injury, or equipment damage.

Turn off and lock out all power supplying this equipment before working on this device.

WARNING

Impairment of protection will result from improper use.

Can cause death, serious personal injury, or equipment damage.

The device may be used only for the applications described in the catalog and the associated

technical documentation.

Note

These operating instructions do not purport to cover all details or variations in equipment, or

to provide for every possible contingency in connection with installation, operation, or

maintenance. Should additional information be desired, or should particular problems arise

that are not discussed in enough detail in the operating instructions, please contact Technical

Support (

https://www.siemens.com/lowvoltage/technical-support

) for the information you

require.

Safety-related symbols on the device

Symbol

Meaning

(1)

Danger of electric shock

(2)

General Warning Symbol

(3)

Electrical installation and maintenance by qualified personnel only

Содержание SENTRON PAC2200CLP



































































































































Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы:

Siemens SENTRON PAC2200CLP, Руководство по эксплуатации продукта, Страница: 10 / 130

Результаты поиска

Содержание SENTRON PAC2200CLP

Отзывы: