Siemens PM330, Руководство по установке оборудования

Страница: 95 / 150

Technical specifications
6.2 Specific technical data
Power Module PM330
Hardware Installation Manual, 12/2018, A5E32844552B AF
93
Article No. 6SL3310- 1PE38-4AA0 1PE38-8AA0 1PE41-0AA0
Recommended cable cross-section for 480 V
- DC link infeed (2/3 inverter power)
- Braking Module
4)
3 x 120 mm
2
35 mm²
3 x 150 mm
2
35 mm²
3 x 185 mm
2
35 mm²
Tightening torque for line, motor, DC link, and
ground cable
50 Nm / 443 lbf in 50 Nm / 443 lbf in 50 Nm / 443 lbf in
Dimensions: Width x height x depth [mm] 801 x 1621 x 393 801 x 1621 x 393 801 x 1621 x 393
Weight 235 kg 250 kg 250 kg
1)
The line supply must be capable of supplying the minimum short-circuit current so that the fuses trigger and consequen-
tial damage is avoided.
Note: If the minimum short-circuit current is not reached, then the tripping time for the fuses increases, and this may re-
sult in consequential damage.
2)
When semiconductor fuses are used, they must be mounted in the same higher construction as the inverter.
3)
The motor cables must be evenly distributed at both connection chambers.
4)
For connection of the Braking Module with rated power of 50 kW, P
20
power of 200 kW.