Siemens MicroSAM Скачать руководство пользователя страница 94

Страница: 94 / 138

Service and maintenance

6.3 Installing and removing electronic components

MicroSAM

Operating Instructions, 06/2012, C79000-G5376-C560-07

6.3.2

Installation of electronic modules

CAUTION

Note the correct mounting position
Make sure that the modules are correctly positioned when installing:



The EPC module has three plug connectors. The side on which the plug connector is

"missing" must point toward the cable gland of the chromatograph.



The RSP module has one cutout. This cutout must point toward the cable gland of the

chromatograph.

Installing the EPC and RSP modules

● Install the two modules in the reverse order to that when removing.

Installing a new CAC module

● Position the CAC module correctly above the connectors, and push in uniformly. Only

press on the two short sides (above the connectors).

Closing the housing

Carefully screw in the cover as far as possible.

Содержание MicroSAM











































































































































Результаты поиска

Содержание MicroSAM

Отзывы:

Siemens MicroSAM, Руководство по эксплуатации, Страница: 94 / 138

Результаты поиска

Содержание MicroSAM

Отзывы: