Siemens MicroSAM Скачать руководство пользователя страница 125

Страница: 125 / 138

Glossary

MicroSAM
Operating Instructions, 06/2012, C79000-G5376-C560-07

123

A.5

Service and Support

Worldwide contact partners

If you have any further questions relating to the products described in this documentation,

contact your local representative at the Siemens office nearest you.
You will find information on whom to contact at this Internet address

www.siemens.com/automation/partner (

Product information on the Internet

The instructions are included on the CDs which are already supplied or may be ordered. In

addition, the instructions are available on the Internet on the Siemens homepage.
A signpost to the range of technical documentation, the online catalog, and the online

ordering system for individual SIMATIC products and systems is available at

www.siemens.com/processanalytics Here you will find:
● Products & solutions, including our newsletter containing up-to-date information on your

products.

● Electronic trading over the Internet.
● Support with e.g. instructions and manuals, certificates, brochures and catalogs.

Training center

Siemens offers corresponding courses for newcomers to process gas chromatography.

Please contact the central Training Center in Karlsruhe.

Training Center Europe

Process Instrumentation and Analytics

Siemensallee 84

D-76181 Karlsruhe, Germany

Internet: www.sitrain.siemens.com (

Technical support

● You can reach the "Technical Support" for all A&D products using:

– the Web form for "Support Request" at www.siemens.com/automation/support-request

) .

– Phone: +49 180 5050 222
– Fax: +49 180 5050 223

(0.14 € / min from German landline, mobile charges may differ)

● You can find the latest information concerning your device on the Internet at

www.siemens.com/automation/ (

Содержание MicroSAM











































































































































Результаты поиска

Содержание MicroSAM

Отзывы:

Siemens MicroSAM, Руководство по эксплуатации, Страница: 125 / 138

Результаты поиска

Содержание MicroSAM

Отзывы: