Siemens MicroSAM Скачать руководство пользователя страница 9

Страница: 9 / 138

MicroSAM
Operating Instructions, 06/2012, C79000-G5376-C560-07

Purpose of this documentation

These instructions contain all information that you will require to commission and use the

device.
It is aimed at persons who install the device mechanically, connect it electrically,

parameterize and commission it, as well as at service and maintenance engineers.

Note



Please read the operating instructions before you use this device. The operating

instructions contain all important information for the device.



Observation of the information:
–  Guarantees correct device functioning
–  Provides reliable results
–  Saves you servicing costs

Information

The contents of these instructions are neither part of an earlier existing agreement,

statement or legal commitment nor do they change this. All obligations on the part of

Siemens AG are contained in the respective sales contract which also contains the complete

and solely applicable warranty conditions. Any statements contained herein do not create

new warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make

technical changes in the course of further development.

History

The following table shows the most important changes in the documentation compared to

each previous edition:

Issue

Comment

Firmware

04
03/2012

Revision of contents and editing

FW: 3.10

03
02/2010

Revision of contents and editing

FW: 3.00

02
09/2008

Revision of contents and editing

FW: 02.08.00

01
08/2006

First edition

FW: 01.17.00

Содержание MicroSAM











































































































































Результаты поиска

Содержание MicroSAM

Отзывы:

Siemens MicroSAM, Руководство по эксплуатации, Страница: 9 / 138

Результаты поиска

Содержание MicroSAM

Отзывы: