manualshive.com logo in svg

Siemens MicroSAM, Руководство по эксплуатации, Страница: 75 / 138

Поделиться
Скачать
Siemens MicroSAM Скачать руководство пользователя страница 75

 

Commissioning and operation 

 

5.3 Switching on the chromatograph 

MicroSAM 
Operating Instructions, 06/2012, C79000-G5376-C560-07 

73

 

5.3

 

Switching on the chromatograph 

Requirement 

The external power switch is fitted and connected as described in Section "Power switch and 

fuse  (Page 63)". 

Procedure 

Switch on the external power switch.  

Response on the display up to release version 4: 

 

Response  LED 

1. 

24 V DC lights up. 

2.  

Health Status on the right and Health Status on the left light up. 

3. 

Sample flow and Maint.Reg. flash together until the MicroSAM is ready. 

4.  

Heartbeat starts to flash when the MicroSAM is ready. 

5. 

Failure lights up until the temperature and pressure have reached their operating values 

and any alarms have been acknowledged. 

6. 

Ready lights up at the end of the switch-on procedure as soon as the chromatograph is 

ready. 

Response on the display from release version 09 onwards: 
The gas chromatograph starts. The message "Starting... " is output in the text box of the 

display. When starting-up has been completed, the message disappears.  

Содержание MicroSAM











































































































































Отзывы:

Нет отзывов