Siemens H-compact PLUS, Руководство по эксплуатации

Страница: 41 / 83

WOGeneric TEAAC / 2008
Siemens AG Operating Instructions 1.03 1RQ671...-Z
39
Operation
8
8.1 Safety notes during operation
WARNING
Do not remove covers when the motor is running
Rotating or live parts are dangerous. Death, serious injury, or material damage can result if
the required covers are removed.
All covers that are designed to prevent active or rotating parts from being touched, ensure
compliance with a particular degree of protection, or that are required for ensuring proper
air guidance and, in turn, effective cooling must not be opened during operation.
WARNING
Faults in operation
Deviations from normal operation such as increased power consumption, temperatures or
vibrations, unusual noises or odors, tripping of monitoring devices, etc., indicate that the
machine is not functioning properly. This can cause faults which can result in eventual or
immediate death, serious injury, or material damage.
Immediately inform the maintenance personnel. If you are in doubt, immediately switch off
the motor, being sure to observe the system-specific safety conditions!
CAUTION
Fire hazard
Certain parts of the motor may reach temperatures above 50 °C. Touching them can result
in burns.
Check the temperature of the parts before touching them and take appropriate protective
measures if necessary.
CAUTION
Risk of corrosion due to condensate
During motor operation, humid air can condense inside the machine. Condensate can
collect inside the motor. Damage such as rust can result.
Depending on the environmental and operating conditions, remove the condensate plugs or
screw plugs to drain the water. When you have finished, reattach the condensate plugs or
screw plugs.
If the motor is equipped with condensate drain holes and draining plugs, the water can
drain off automatically.
[ID 36.03]