manualshive.com logo in svg

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 88 / 180

Поделиться
Скачать
Siemens FCT010/DSL Скачать руководство пользователя страница 88

WARNING

Impermissible accessories and spare parts

Risk of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for the 

device or enclosed with the accessory or spare part.

WARNING

Humid environment

Risk of electric shock.
• Avoid working on the device when it is energized.
• If working on an energized device is necessary, ensure that the environment is dry.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates 

the inside of the device.

WARNING

Enclosure open

Risk of explosion in hazardous areas as a result of hot components and/or charged capacitors 
inside the device. 

To open the device in a hazardous area:
1. Isolate the device from power.
2. Visually inspect sensor inlet and outlet.

Exception: Devices exclusively having Intrinsic safety (Ex i) may be opened in an energized 
state in hazardous areas.

WARNING

Hot, toxic or corrosive process media

Risk of injury during maintenance work.

When working on the process connection, hot, toxic or corrosive process media could be 
released.
• As long as the device is under pressure, do not loosen process connections and do not 

remove any parts that are pressurized.

• Before opening or removing the device ensure that process media cannot be released.

Service and maintenance
9.4 Maintenance and repair work 

SITRANS MASS 2100 & FC300 (FCT010/DSL)

88

Operating Instructions, 06/2020, A5E39788682-AB

Содержание FCT010/DSL





















































































































































































Отзывы:

Нет отзывов