manualshive.com logo in svg

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 44 / 180

Поделиться
Скачать
Siemens FCT010/DSL Скачать руководство пользователя страница 44

5.2

Wiring

Hazardous area applications

Special requirements apply to the location and interconnection of sensor and transmitter. 
See Use in hazardous areas (Page 15).

WARNING

Transmitter enclosure

Before opening the terminal box check that: 
• No explosion hazard exists
• All connection leads are potential free

5.3

Connecting MASS 2100/FC300

WARNING

Improper handling

The sensor connected to this device can be operated with high pressure and corrosive media. 
Therefore improper handling of the device can lead to serious injuries and/or considerable 
material damage.

The device is optionally provided with a preformed cable terminated with M12 style stainless 
steel weather-proof plugs.

The cable shield is physically and electrically terminated within the body of the plug.

Take care when handling the cable and passing it through cable ducting. The plug is not 
subjected to excessive tension (pulling) as the internal connections may be disengaged.

Note

Never pull the cable by the plug.

1. Connect the device using the supplied 4-wire cable with M12 plug.

Note
Grounding

The sensor cable screen is electrically connected to chassis, only when the M12 plug is 
correctly tightened. 

Connecting
5.3 Connecting MASS 2100/FC300

SITRANS MASS 2100 & FC300 (FCT010/DSL)

44

Operating Instructions, 06/2020, A5E39788682-AB

Содержание FCT010/DSL





















































































































































































Отзывы:

Нет отзывов