manualshive.com logo in svg

Siemens FCT010/DSL, Руководство по эксплуатации, Страница: 41 / 180

Поделиться
Скачать
Siemens FCT010/DSL Скачать руководство пользователя страница 41

Connecting

5

5.1

Basic safety notes

WARNING

Unsuitable cables, cable glands and/or plugs

Risk of explosion in hazardous areas.
• Use only cable glands/plugs that comply with the requirements for the relevant type of 

protection.

• Tighten the cable glands in accordance with the torques specified in Technical data 

(Page 107).

• Close unused cable inlets for the electrical connections.
• When replacing cable glands, only use cable glands of the same type.
• After installation, check that the cables are seated firmly.

WARNING

Incorrect conduit system

Risk of explosion in hazardous areas as result of open cable inlet or incorrect conduit system.
• In the case of a conduit system, mount a spark barrier at a defined distance from the device 

input. Observe national regulations and the requirements stated in the relevant approvals.

NOTICE
Condensation in the device

Damage to device through formation of condensation if the temperature difference between 
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation, let the device adapt for several hours in the new 

environment.

NOTICE
Ambient temperature too high

Damage to cable sheath.
• At an ambient temperature ≥ 60 °C (140 °F), use heat-resistant cables suitable for an 

ambient temperature at least 20 °C (36 °F) higher.

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

41

Содержание FCT010/DSL





















































































































































































Отзывы:

Нет отзывов