Siemens 7ME3510 Скачать руководство пользователя страница 119

Страница: 119 / 214

Maintenance and service

9.1

Maintenance

The device is maintenance-free, however a periodic inspection according to pertinent

directives and regulations must be carried out.
An inspection can include check of:
●

Ambient conditions

●

Seal integrity of the process connections, cable entries, and cover screws

●

Reliability of power supply, lightning protection, and grounds

9.2

Technical support

If you have any technical questions about the device described in these Operating

Instructions and do not find the right answers, you can contact Customer Support:
●

Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

●

Via Phone:
–

Europe: +49 (0) 911 895 7222

–

America: +1 423 262 5710 / +1 800 333-7421

–

Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at

Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

)

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the

Internet at:
Service and support (

http://www.siemens.com/automation/service&support

)

There you will find:
●

The latest product information, FAQs, downloads, tips and tricks.

●

Our newsletter, providing you with the latest information about your products.

●

Our bulletin board, where users and specialists share their knowledge worldwide.

●

You can find your local contact partner for Industry Automation and Drives Technologies

in our partner database.

●

Information about field service, repairs, spare parts and lots more under "Services."

FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02

117

Содержание 7ME3510























































































































































































































Результаты поиска

Содержание 7ME3510

Отзывы:

Siemens 7ME3510, Руководство по эксплуатации, Страница: 119 / 214

Результаты поиска

Содержание 7ME3510

Отзывы: