manualshive.com logo in svg

SIEB & MEYER sinudyn-0360520 Series, Описание аппаратуры

Поделиться
Скачать
SIEB & MEYER sinudyn-0360520 Series Скачать руководство пользователя страница 94

:

Appendix: Revisions

sinudyn-36

Hardware Description 0360520xx

93

16

Appendix: Revisions

This appendix describes alterations in comparison with previous versions of the 
manual.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R001-SM-EN-hk/ez/ac/she
June 23, 2003

Separation of the documentation for the two devices sinudyn 0360510xx and
0360520xx with adequate adaptation of technical drawings and data.

Modification of nearly all the figures and technical drawings.

The chapter "Restart lock" has been added. 

sinudyn-36

 Hardware Description 36.05.20xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R001-SM-EN-hk/ez/ac/she
June 23, 2003

The chapter "Connection to Different Supply System Types“ has been added.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R002-SM-EN-hk/ez/ac/she
February 9, 2006

Completely revised.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R003-SM-EN-hk/ez/ac/she
March 22, 2006

The figures of the devices with PE bolt has been revised.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R004-SM-EN-hk/ez/ac/she/al/sli/sü
January 22, 2007

The Technical Datas have been revised.
UL requirements in the chapter "General Information" has been added.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R005-SM-EN-hk/ez/ac/she/al/sli/sü
August 13, 2007

The safety concept in the chapter “Connectors - X40“ and “Restart Lock“ has been
added.

sinudyn-36

 Hardware Description 0360520xx Front Connection Design

036-servo-tec-sinudyn 36.05.xx/R006-SM-EN-hk/ez/ac/she/al/sli/sü/uh
January 25, 2008

The connector X1 linear hall effect sensor has been added. Chapter "Connection to
different Supply System Types" and contents of the chapter "Unit Assembly Comply-
ing EMC" are removed. A notice of the new documentation regarding these topics
has been included in the latter. 

Содержание sinudyn-0360520 Series
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды