MONITORING
7
85
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
7.3.4
Accessing information about a specific vehicle
To start with, the Position display tab visualizes all vehicles in the fleet.
There are two ways to narrow the position display feature down to include data for just
one vehicle:
•
Mark the vehicle in the
Vehicle list
in the bottom left-hand corner.
•
Find the vehicle you are looking for using the
Vehicle search
function.
Accessing route information for a vehicle
Once a vehicle has been selected, the position display view will change.
•
A
toolbar
containing predefined reports for the selected vehicle will appear underneath
the
Position display
tab.
•
The
map
will now show the route most recently covered by the vehicle.
•
The
Info
section on the right-hand side contains information on the current location of
the selected vehicle. The event last sent by the TDC device is displayed, providing an
effective way of checking whether the TDC device is operating properly.
If the fleet management system has been configured in TDC Configurator (for further
information on this, refer to Chapter
), the current mileage is accessed
from the vehicle's CAN bus and is displayed here.