COMMISSIONING
6
43
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
6.4
Connecting to the TDC device
6.4.1
Launching the configuration software
Launch the configuration software and log in to
TDC Configurator
at the
Service
user
level.
Logging in
1. To log in, click on the program icon in the Windows start menu or on the desktop.
The login window will open.
2. Under
Access
, select the
Service
user level.
3. Enter
servicelevel
as the password.
4. Click
OK
to confirm.
The configuration software will open.
The
TDC Configurator
configuration interface
The
TDC Configurator
configuration interface is divided into several sections.
•
A number of functions can be found in the
menu bar.
This is where the connection to
the TDC device is established and where parameters can be written onto the device
or loaded into the configuration software from the device. A configuration can also be
stored on a local data card.
•
In the
top left-hand
corner, you can see the
Device
box for the connected TDC device.
No information about the device is currently being displayed in this box because the
connection is yet to be established.
•
In the
bottom left-hand
corner, you can see the TDC device configuration. This is where
the connection settings are saved and the sensor interfaces are configured.
•
The
right-hand side
is used for entries depending on the current processing context.