COMMISSIONING
6
61
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
6.5.2.4
Configuring a telemetry element for a motor signal
If a wire of the connecting cable for the voltage supply has been connected to the motor
ignition system (refer to Chapter
5.1.3 Connecting the TDC device to the ignition system
the incoming signal will be detected at the corresponding input and configured as follows.
1. Mark the corresponding input under the
Telemetry Elements
tab.
2. Click on the
Add
button.
3. Assign a meaningful name to the telemetry element in the
Description
field. The
unique identifier will be assigned automatically and entered in the
Name
field.
4. Configure the interface by following the instructions provided for digital sensors.
5. Select
Standard digital sensor
as the type in the
Sensor Type
field and apply the
settings for a
Digital
signal as described in the previous chapter.
6. In the
Sampling
section, select
OnStartup
or
OnChange
as the trigger, for example.