background image

1

CONVERTS NUMEROUS PROTOCOLS SIMULTANEOUSLY

EXTENSIVE BUILT-IN DRIVER LIST ALLOWS EASY DATA

MAPPING TO PLCs, PCs, AND SCADA SYSTEMS

10 BASE-T/100BASE-TX ETHERNET PORT SUPPORTS FOUR

SIMULTANEOUS PROTOCOLS

INDEPENDENT SERIAL PORTS PROVIDE VIRTUALLY

UNLIMITED INTEGRATION METHODS

SUPPORTS UP TO NINE PROTOCOLS SIMULTANEOUSLY(with

expansion card)

GENERAL DESCRIPTION

The Data Station Plus was designed to act as a nexus for industrial data

collection and management. With three built in serial ports and a 10 Base-T/100
Base-TX Ethernet port, the unit performs protocol conversion, allowing
disparate devices to communicate seamlessly with one another. The Ethernet
port supports up to four protocols simultaneously so even Ethernet to Ethernet
conversion may be performed.

The CompactFlash card allows new configuration files to be loaded into the

Data Station Plus. The USB port may be used for blazing fast file downloads, or
to mount the Data Station’s CompactFlash card as an external drive to your PC.
The Data Station’s DIN rail mounting saves time and panel space and snaps
easily onto standard top hat (T) profile DIN rail.

SOFTWARE

The Data Station is programmed with Crimson

®

2.0 software for Windows

®

2000 or later platforms. The software is an easy to use graphical interface which
can be purchased as part of a kit that includes a manual and cables, or
downloaded free of charge from www.redlion.net.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

Do not use the controller to directly command motors, valves, or other

actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller. An independent and
redundant temperature limit indicator with alarm outputs is strongly
recommended.

CompactFlash is a registered trademark of CompactFlash Association.

MODEL DSPLE – DATA STATION PLUS

Bulletin No.  DSPLE-C
Drawing No.  LP0671
Released  03/09

Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net

CAUTION: Risk of Danger.

Read complete instructions prior to 

installation and operation of the unit.

DIMENSIONS  In inches (mm)

FOR USE IN HAZARDOUS LOCATIONS:

Class I, Division 2, Groups A, B, C, and D

3PWL

PROGRAMMABLE 

CONTROLLERS

CC

US LISTED

US LISTED

UL

R

IND. CONT. EQ.

34AD

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF
COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2

THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D, OR NON-HAZARDOUS
LOCATIONS ONLY

Summary of Contents for Data Station Plus









Reviews: