SICK NAV-LOC Скачать руководство пользователя | Manualshive

Страница: 6 / 60

background image

1

About this document

8021386/12G4 /2019-04-24 | SICK

OPERATING INSTRUCTIONS | NAV-LOC

6

Subject to change without notice

1

About this document

1.1

Information on the operating instructions

These operating instructions are intended to allow the technical personnel to perform safe mounting,
electrical installation work, configuration, commissioning, and maintenance on the  2D LiDAR sensor
and  the  “Sensor  Integration  Machine”  (SIM)  for  localization  based  on  contour  data.  The  SIM2000-
0A20A00 and a 2D LiDAR sensor are used together and referred to as NAV-LOC in the following de-
scription. The system  components are referred to as 2D LiDAR sensor and SIM (Sensor Integration
Machine) for short, unless a clear distinction needs to be made.

This document describes solely how to operate NAV-LOC in a general sense. The instructions stated
below are supplementary device-specific documents for 2D LiDAR sensors, which can be combined
with  the  SIM2000-0A20A00  as  a  data  source.  These  are  required  in  addition  as  they  describe  the
specific connection options and configuration for each sensor:



NAV-LOC: SIM2000, NAV310 operating instructions (German

, English



NAV-LOC: SIM2000, NAV245 operating instructions (German

, English



NAV-LOC: Telegram Listing (English

1.2

Explanation of symbols

All symbols used in this document and their meaning, warnings, and important information are marked
with symbols in this document and are compiled below. The warnings are introduced by signal words
that indicate the extent of the danger. These warnings must be observed at all times and care must be
taken to avoid accidents, personal injury, and material damage.
DANGER
… indicates a situation of imminent danger, which will lead to a fatality or serious
injuries if not prevented.

WARNING
… indicates a situation of possible danger, which can lead to a fatality or serious
injuries if not prevented.

CAUTON
… indicates a situation of possible danger, which can lead to minor or moderate
injuries if not prevented.

IMPORTANT
… indicates a situation, which can lead to property damage
if not prevented.

NOTE
… highlights useful tips and recommendations as well as information for efficient
and trouble-free operation.

«
...
4
5
6
7
8
...
»

Содержание NAV-LOC





























































Отзывы:

Нет отзывов

Похожие инструкции для NAV-LOC

Бренд: Hardy Barth Страницы: 27

Бренд: Kawai Страницы: 8

Бренд: ColorLite Страницы: 68

Instrument Control System

Бренд: Opus-Two Страницы: 8

Бренд: E-Mon Страницы: 72

Бренд: Eno Scientific Страницы: 47

Бренд: Hanna Instruments Страницы: 25

3501B1260KG/M010LN

Бренд: PCB Piezotronics Страницы: 10

Friendly Digital Piano Forte PV35

Бренд: Kawai Страницы: 102

Бренд: Vaisala Страницы: 11

Бренд: Hanna Instruments Страницы: 2

Бренд: Underground Magnetics Страницы: 53

Бренд: NARDA Страницы: 60

Бренд: Hanna Instruments Страницы: 48

Бренд: OHAUS Страницы: 63

Бренд: M-Sure Страницы: 2

Бренд: KRAL Страницы: 32

Бренд: USA Measurements Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды