m-sur
e.co
.uk
www.m-sure.co.uk - Allendale Group Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2020 Allendale Group Limited. E&OE - Specifi cations subject to change without prior notice.
M-SURE Digital Micr
ometer User Man
ual
Part No: MS-110 Series
Doc V:
1.0
M-SURE Digital Micrometer
• This M-SURE micrometer is a precision measuring instrument, please avoid using excessive force and treat with care.
•
The battery fitted is intended for the factory test procedure and therefore may not meet the specified battery life.
• Avoid exposure to all liquids, excessive humidity or temperature.
• Avoid exposure to bright sunlight.
• DO NOT rotate the spindle with the spindle lock engaged.
• Ensure the measuring surfaces are clean.
• Never apply voltage on any part of this digital micrometer or electric engrave the micrometer.
• Remove the battery if the micrometer is not being used for a long period of time.
• The spindle can not be removed, DO NOT travel past the upper or lower limit.
• Never use solvents to clean the micrometer Only use a soft cloth with cleaning oil.
Precautions
Battery Replacement
Digital Micrometer
1. Frame
2. Anvil
3. Spindle
4. Spindle Lock
5. Display Head
6. Ratchet Thimble
7. Function Buttons
1. Insert the key into the battery cover.
2. Twist to unlock. DO NOT use
excessive force.
3. Lift out the battery cover.
4. Remove the battery.
(A magnet tip tool can
be used)
5. Locate the side spring battery contact.
6. Insert the replacement battery with
its edge against the side battery contact.
7. Press down on the opposite edge.
8. Locate the three lugs on the battery
cover with the three slots on the
micrometer. Insert the battery cover.
9. Twist to lock. DO NOT use excessive
force.
Twist to lock and unlock spindle.
Do not use excessive force.
1
1
2
6
7
8
9
3
4
5
8
2
3
5
4
7
6
