Shindaiwa EGW165M-I/UKV, Руководство владельца и оператора

Страница: 28 / 40

- 22 -
8. Generator Operation
Warning: Electric Shock
 Do not operate the equipment, if the equipment or you are wet.
Caution: Injuries
 Attach a plug to the receptacle of the equipment, after confirming the breaker is in
the [OFF] position.
 Be sure to use the frequency designated in the load.
 Ensure the AC Output Switch is in the [OFF] position before connecting any plugs to
the AC Output Receptacle.
 Always examine welding cables, power cables and plugs etc., to ensure there are
no defects present, prior to operation.
 Do not connect the equipment to any power supply network.
 Extra precautions must be taken whenever performing more hazardous welding
operations such as:
 environments with increased risk of electric shock, for example due to
humidity or conductivity;
 flammable surroundings and/or atmospheres;
 flammable products;
 closed containers;
 elevated working positions or platforms.
Caution: Damage to the equipment or other properties
 Consult with our dealer or authorized distributor when utilizing this equipment
around devices with the microcomputer control or the ultra-precision items, which
are very sensitive to voltage fluctuation.
 Keep the equipment away from those devices to avoid influence from
electromagnetic noise.
 Consult with hospital or medical equipment companies before using this equipment
on medical apparatus.
 It is recommended you follow this instruction manual strictly, to avoid any
unnecessary accidents, repairs and damage.
 In the event of using the equipment to provide power for computers,
microcomputers incorporated loads and precision equipment, there is a possibility
for them to mal-function.
 Be sure to use the frequency designated in the load. Otherwise the load may
become damaged.
 Consult with our dealer or an authorized distributor when utilizing this equipment on
devices with microcomputer control or ultra-precision items, which are very sensitive
to voltage fluctuation.
 EMC classification Group 2 Class A.
 Do not use this equipment for the purpose of thawing pipes.
 If utilizing this equipment in conditions where altitude, ambient temperature and/or
humidity is higher than the reference conditions, a reduction in power may be
necessary.