Shindaiwa EGW165M-I/UKV, Руководство владельца и оператора

Страница: 31 / 40

- 25 -
(1) Change Engine Oil
First Time 20 hours mark
2nd or after Every 100 hours
1. Open the oil maintenance cover.
2. Put the oil saucer under the oil drain outlet.
3. Remove the oil gauge.
4. Loosen the oil drain plug and allow the oil
drain fully.
5. Reinstall the oil drain plug.
6. Checking the oil level by the oil gauge, add oil
into the oil fill up to the max level.
(Approximately 1.0 Liter)
<Caution>
 Refer to 6-1. (1) Checking Engine Oil (P. 13)
to select engine oil.
7. Reinstall the oil gauge hand tight.
<Caution>
 Keep the engine idling for a while to be sure
no oil leakage from the oil drain outlet after
changing oil.
(2) Clean/Adjust Spark Plug
Clean/Adjust Every 50 hours
1. Open the plug maintenance cover.
2. Remove the plug cap and remove the spark
plug.
3. If the spark plug is dirty, wipe out the dirt by
using spark plug cleaner or wire brush.
4. Adjust the opening to 0.7-0.8 mm between
the electrodes.
5. Tighten the spark plug and reassemble the
plug cap.
<Caution>
 Tightening torque of the plug: 20 N ･ m

Use the plug of [NGK BPR4ES].
GAP 0.7 mm to 0.8 mm
(0.028 in to 0.031 in)
Oil Gauge
Upper Level
Lower Level
Oil Gauge
Oil Drain Plug
Oil Drain Outlet
Plug Cap
Plug Maintenance Cover
Switch the Knob to
arrow direction
Open to arrow direction
Oil Maintenance
Cover
Press the Click to
arrow direction
Open to arrow
direction