- 17 -
6-2. Starting
Total operation hours will be indicated for 5 seconds only, after the engine has started.
Then the display will automatically change to pre-set welding current.
(The pre-set welding current lamp turns on.)
<Caution>
Before starting the engine, be sure the safety of surroundings.
Please avoid operating in places with high temperatures, high humidity and lots of dust
as much as possible.
Close all equipment doors during operation of this equipment, to avoid malfunction by
losing balance of the cooling capability.
(1) Starting by Starter Motor
1. Switch the AC output switch to [OFF] position.
2. Open the front door and turn the fuel valve to
[OPEN] position.
3. Pull out the choke.
4. Turn the starter switch to [START] position.
The starter motor turns and then the engine
starts.
<Caution>
Do not keep the starter motor ON for more
than 5 seconds.
When restarting, wait for 30 seconds or more
5. When the engine starts, release the starter
key immediately.
Warning: Suffocation from exhaust fume
Exhaust fumes from the engine contain many elements harmful to humans. Do not
operate this equipment in poorly ventilated areas, such as inside a room or in a
tunnel.
Warning: Fire
Temperatures around the muffler and exhaust can reach extremely high levels.
Keep flammable items (such as fuel, gas, paint, etc.) away from the equipment.
Always operate the equipment on flat a surface and, with at least 1 metre clearance
from any objects.
Never operate the equipment covers with the flammable products.
Do not operate the equipment when it is stored in a vehicle.
.
V
Caution: Suffocation from exhaust fumes
Do not point the exhaust fume toward pedestrians or building.
Caution: Injuries
Always place the equipment on a flat and stable surface and fix wheels with brakes,
to prevent the equipment moving.
When starting the engine, turn off any connected equipment and set the AC output
switch to [OFF] position.
[OPEN]
Fuel Valve [CLOSE]
Starter Switch
ELCB
Choke
AC Output Switch
Содержание EGW165M-I/UKV
