Shindaiwa EGW165M-I/UKV, Руководство владельца и оператора

Страница: 35 / 40

- 29 -
4. Turn the fuel valve to [CLOSE] position and re-fit the strainer cup tight with the ring.
<Caution>
 Be sure to check for any contaminants on the seal, whenever reinstalling the strainer
cup.
5. Re-fit the fuel valve with the bolts.
6. Pulling out the plug of the load from the receptacle, start the engine and leave running
until it stops. (The fuel in the carburetor is consumed)
7. Turn the starter switch to [STOP] position, and remove the starter key.
8. Change the engine oil.
(Refer to 9. Checking and Maintenance (1) Change Engine Oil (P. 25))
9. Remove the spark plug and inject engine oil approximately 5 ml.
(Refer to 9. Checking and Maintenance (2) Clean and Adjust Spark Plug (P. 25))
10. Insert the starter key again, use the starter switch to crank the engine for
approximately 5 seconds.
11. Turn the starter switch to [STOP] position, and remove the starter key.
12. Re-fit the spark plug and ensure it is tight.
13. Clean the air cleaner.
(Refer to 9. Checking and Maintenance (3) Clean and Change Air Cleaner (P. 26))
14. Remove the battery.
(Refer to 9. Checking and Maintenance (6) Checking the Battery (P. 27))
(Always remove negative (-) side first and always reinstall positive (+) side first.)
<Caution>
 Store the battery in a well ventilated area, keeping it away from risk of naked flames.
 Recharge the battery once a month.
15. Clean all the parts, cover and store it in a clean and dry place.
11. Troubleshooting
Warning: Electric Shock
 Do not operate the equipment, if the equipment or you are wet.
 Before performing troubleshooting, stop the engine and remove the starter key. The
person performing troubleshooting trouble must always keep the key.
Warning: Injuries
 Before performing troubleshooting, stop the engine and remove the starter key. The
person performing troubleshooting trouble must always keep the key.
Warning: Fire
/
Burns
 When checking engine, always stop the engine, and keep away from fire.
 When cleaning the fuel strainers, always stop the engine, remove static electricity.
Caution: Burns
 Temperatures around muffler and exhaust can get extremely high. Wait until the
engine cools down, before performing any checks.