Shimadzu ICPE-9000, Инструкция по эксплуатации

Страница: 89 / 116

8 Maintenance
8-15
8.6 Replacing the Leveler Exhaust Tube
(1) Pull the leveler exhaust tube out of the leveler. (See "Fig. 8-14".)
(2) Remove the exhaust tube from the tube hook and the tube-holding block.
(3) Remove the leveler exhaust tube from the holding bands on the duct.
(4) Remove the leveler exhaust tube from the holding bands on the rear side.
(5) Insert the new leveler exhaust tube in the holding bands on the duct. Ensure that the end of the
leveler exhaust tube does not protrude above the top end of the plasma stand exhaust guide.
(6) Secure the leveler exhaust tube with the holding bands on the rear side.
(7) Secure the leveler exhaust tube and the drain tube with the tube-holding block and the tube hook.
Ensure that there is no slack in the drain tube. (See "Fig. 8-14".)
(8) Attach the leveler exhaust tube to the leveler.
Holding bands on duct
Holding bands on rear side
Leveler exhaust tube
Top end of plasma stand
exhaust guide
Fig. 8-15 Tube Arrangement on Right Rear Side