Shibaura ST329, Руководство оператора

Страница: 30 / 72

CONTROLS, INSTRUMENTS AND OPERATIONS
28
FLOW CONTROL VALVE
The flow control valve, Figure
37 , provides an ad-
justment to regulate the flow of oil from the lift cyl-
inder, thus slowing or increasing the rate of drop of
the lower links.
To adjust rate of flow, either turn the flow control
valve clockwise to decrease the rate of drop or
counterclockwise to increase the rate of drop. The
flow control valve must be opened before hydraulic
lift control will function.
Figure 37 - Flow Control Valve
HYDRAULIC MANIFOLD BLOCK/DIVERTER
The hydraulic Manifold Block is provided to supply
hydraulic oil to equipment such as a front loader,
dozer blade, etc. Location of the Block is shown in
Figure
38 .
To operate auxiliary equipment, remove the plugs
from the manifold block and connect the feed hose
to the outlet port, Figure
38 and the return hose to
the inlet port.
Figure 38 - Hydraulic Manifold Block
IMPORTANT
： ： ： ：
In order to operate auxiliary equip-
ment, the control screw must be turned to the posi-
tion shown at (2). With a front remote valve in-
stalled, it is
not required to turn the control screw to
the position shown at (1) to operate the three point
linkage. When it is required to operate the three
point linkage
only , the screw must be turned to the
position shown at (1).