Shibaura ST329, Руководство оператора

Страница: 59 / 72

LUBRICATION AND MAINTENANCE
52
Figure 81 - Front Axle Oil Level Dipstick/Filler Plug
Changing Oil
： ： ： ：
Change the oil every 300 hours.
1. With the oil at normal operating temperature,
drain the oil by removing the front axle differen-
tial, Figure
82 , and final reduction gear case
drain plugs, Figure 83 . Reinstall the plugs after
the oil has drained. Discard the oil.
NOTE: Remove the front wheel before drain or
refill oil of the final reduction gear case.
2. Remove the filler plugs at each final reduction
gear case, Figure 83 , and fill with new oil as
specified on page 35 , and install the filler plug.
3. Remove the dipstick/filler plug on the top, right
side of axle housing, Figure 81 , and fill with new
oil of the type specified, page 35 .
4. The front axle is filled to correct level when the
oil level is between the mark and lower end of
the stick. Do not fill beyond the full mark on the
stick, as the front axle will be overfilled.
5. Install the dipstick/filler plug.
Figure 82 - Front Axle Differential Drain Plug and
Grease Fitting
Figure 83 - Final Reduction Gear Case Filler and
Drain Plugs. And Turn Stop Bolt
NOTE:
To ensure correct steering operation the
stop bolt, Figure 83 , should protrude a minimum of
20mm from the casing.