Shibaura ST329, Руководство оператора

Страница: 11 / 72

CONTROLS, INSTRUMENTS AND OPERATIONS
9
ROLLOVER PROTECTIVE STRUCTURE(ROPS)
Your tractor is equipped with a folding Roll Over
Protective Structure(ROPS). If, for some reason,
the ROPS was deleted by the original purchaser or
has been removed, it is recommended that you
equip your tractor with a ROPS.
ROPS are effective in reducing injuries during
tractor overturn accidents. Overturning tractor
without a ROPS can result in serious injury or
death.
Roll Over Protective Structure (ROPS), is available
from your SHIBAURA Tractor Dealer.
WARNING
：
： ：
：
When improperly oper-
ated, a tractor can roll over.
For low clearance use only, the ROPS
may be lowered.
No protection is provided when the
tractor is operated with the ROPS in
the lowered position.
Always raise the ROPS and lock it
immediately after low clearance work.
Figure 3 - Rollover Protective Structure (ROPS)
Folding the ROPS
A foldable ROPS is factory installed on your tractor.
Operate with ROPS in the raised position when-
ever possible. Use the ROPS in the folded position
only when absolutely necessary.
To fold the ROPS remove two locking pins, Figure
4 , Lower the upper section of the ROPS rearward.
Install two locking pins to anchor the ROPS firmly
once in position. To raise the ROPS reverse the
above procedure.
Figure 5 - ROPS, Folded Position
WARNING
： ： ： ：
Do not operate the tractor
with the ROPS folded as a standard
operating mode. A folded ROPS does
not provide rollover protection.
Always pull from the tractor the drawbar. Do not
attach chains or ropes to the ROPS for pulling pur-
poses, as the tractor can tip backwards.
Figure 4 - ROPS, Raised Position