SPECIAL MODES
3-6
AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER
TRANSMISSION)
This feature enables you to set up a transmission to be performed automatically at a specified time up to a week in
advance. A combined total of 94*
1
(47*
2
) timer transmission and memory transmission jobs can be stored.
■
SETTING UP A TIMER TRANSMISSION
1
Switch to the desired mode and touch the
[SPECIAL MODES] key.
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (
page 1-
13
).
2
Touch the [TIMER] key.
The timer transmission
screen appears.
3
Select the day of the week. (Touch the
key or the
key until the desired day is
selected.)
The initial setting is "---"
(no selection). If you
select this setting, the
transmission will be
performed as soon as
the specified time
arrives.
4
Select the time. (Touch the
key or the
key until the desired time appears.)
Select the time in 24-
hour format.
Example:
11:00 P.M.
23:00
5
Touch the outer [OK] key.
You will return to the
screen of step 1 and a
timer transmission icon
will appear next to the
[EXPOSURE] key.
To cancel timer, touch the
[CANCEL] key.
6
Perform the send procedure as explained in
"SENDING AN IMAGE".
●
For scan mode, see
page 2-2
.
●
For Internet fax mode, see
page 2-6
.
*1 On the MX-M350N/450N, or on a model with the network expansion kit (with hard drive) installed
*2 Without the network expansion kit (with hard drive)
NOTES
●
To perform a timer transmission, the document must be scanned into memory. It is not possible to leave the
document in the auto document feeder or on the document glass and have it scanned at the specified time of
transmission.
●
To set the date and time in the machine, refer to page 2-12 of the operation manual (for general information and
copier operation).
●
After a timer transmission is performed, the information (image, destination, etc.) is automatically cleared from
memory. (However, when the document filing function is used, the scanned document image is stored in the
machine's hard disk. For information on managing stored images, see "DOCUMENT FILING FUNCTION" in
chapter 7 of the operation manual (for general information and copier operation).)
SPECIAL MODES
ADDRESS REVIEW
FILE
ENTRY
QUICK FILE
TTINGS
ER
TIMER
PROGRAM
DAY OF THE WEEK
TIMER
CANCEL
HH.
0
00
mm.
TIME
OK
OK
CANCEL
NOTES
●
Other operations can be performed after a timer transmission is set up. If another operation is in progress when
the specified time arrives, the timer transmission will begin when the job in progress is completed.
●
If a timer transmission job is given priority in the job status screen (See "PRIORITY TRANSMISSION OF A STORED
JOB" on
page 3-12
.), the time setting will be cancelled and the job performed as soon as the current job is completed.
