Sharp MX-C250 Скачать руководство пользователя

Страница: 157 / 210

157

TROUBLESHOOTING

Misfeed in the fusing area B

Lower the fusing unit release levers to allow easier removal.

Lower the part with the green label that protrudes from the fixing unit paper guide,
and open the fixing unit paper guide.

Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

If the misfed paper cannot be removed, remove the paper by pulling it into the paper
output area.

Be careful not to tear the misfed paper during removal.

Lift the part with the green label that protrudes from the fixing unit paper guide, and
close the fixing unit paper guide.

Lift the fusing unit release levers, to return them to their operating positions.

The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or injury.

• When removing misfed paper, do not touch or damage the transfer

belt.

• Be careful about unfixed toner on the misfed paper not to soil your

hands or clothes.

Fusing unit release levers

Warning

Caution

Содержание MX-C250



















































































































































































































Результаты поиска

Содержание MX-C250

Отзывы:

Похожие инструкции для MX-C250

Бренды по названию

Популярные бренды

Sharp MX-C250, Руководство по эксплуатации

Результаты поиска

Содержание MX-C250

Отзывы:

Похожие инструкции для MX-C250

Бренды по названию

Популярные бренды