manualshive.com logo in svg

Sharp MX-C250, Руководство по эксплуатации

MX-C250 - многофункциональный принтер от Sharp с качественной цветной печатью и высокой производительностью. Для правильной эксплуатации устройства необходимо ознакомиться с Operation Manual. Скачайте бесплатно руководство по эксплуатации с нашего сайта.

Поделиться
Скачать
background image

15

BEFORE USING THE MACHINE

POWER ON AND OFF

The power switch is located on the left side of the machine.

POWER ON

Turn the power switch to the "ON" 
position.

While the machine is warming 
up, the message "Warming 
Up" will appear in the 
message display.

POWER OFF

Make sure that the machine is not in 
operation and then turn the power switch 
to the "OFF" position.

If the power switch is turned off while the machine is in 
operation, a misfeed may occur and the job that was in 
progress will be canceled.

POWER SAVE MODES

The machine has two power save modes to reduce overall power consumption thereby reducing the cost of 
operation. In addition, these modes conserve natural resources and help reduce environmental pollution. The two 
power save modes are "Preheat mode" and "Auto power shut-off mode".

Preheat mode

This function automatically switches the machine to a low power consumption state if the duration of time set in the 
system settings elapses without the machine being used when the power is on. In preheat mode the display turns 
off. Normal operation automatically resumes when a key on the operation panel is pressed, an original is placed, or 
a print job or fax is received.

Auto power shut-off mode

This function automatically switches the machine to a state that consumes even less power than preheat mode if the 
duration of time set in the system settings elapses without the machine being used when the power is on. During auto 
power shut-off, only the [ENERGY SAVE] indicator blinks. To restore the machine to normal operation, press the 
[ENERGY SAVE] key. Normal operation also resumes automatically when a print job or fax is received or scanning is 
begun from a computer. While auto power shut-off is in effect, pressing a key other than the [ENERGY SAVE] key will 
have no effect.

DEFAULT SETTINGS

The machine is set at the factory to return all settings to the default 
settings one minute after a copy job is finished (auto clear function) or 
when the [CA] key is pressed. When the settings return to the default 
settings, any functions that were selected are canceled.
The auto clear time can be changed in the system settings. 

(p.179)

In the default state the display shown below appears. The default state of 
the display may vary depending on settings in the system settings.

• The machine reverts to the initial settings when it is first turned on, when the [CA] key is pressed, or when no 

keys are pressed for the preset "Auto clear" time following the end of a copy job. When the machine reverts to 
the initial settings, all settings and functions selected to that point are canceled. The "Auto clear" time can be 
changed in the system settings. (p.179)

• The machine is initially set to automatically enter power save mode if not used for copying or printing, for a 

preset period of time. This setting can be changed in the system settings. (p.180)

• Before using fax mode, read the following sections and then turn on the power.

"TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE" (p.79)
"POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" (p.80)

Note

The preheat activation time and the "Auto power shut-off timer" can be changed using system settings.

Note

Содержание MX-C250



















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-C250

Canon MX490 Series Setup Manual preview
MX490 Series
Бренд: Canon Страницы: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Бренд: Canon Страницы: 2
Canon Photura 135 Review preview
Photura 135
Бренд: Canon Страницы: 12
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Бренд: Canon Страницы: 4
Panasonic KX-P8415 Operating Instructions preview
KX-P8415
Бренд: Panasonic Страницы: 3
Panasonic KX-P7105 Operating Instructions preview
KX-P7105
Бренд: Panasonic Страницы: 4
Oki C6150 Series Reference Manual preview
C6150 Series
Бренд: Oki Страницы: 104
Samsung CLP-360 User Manual preview
CLP-360
Бренд: Samsung Страницы: 224
Canon MF5750 - ImageCLASS B/W Laser Remote Ui Manual preview
MF5750 - ImageCLASS B/W Laser
Бренд: Canon Страницы: 42
Panasonic KX-MC6020 Service Manual preview
KX-MC6020
Бренд: Panasonic Страницы: 486
Rena AS-150 Service Manual preview
AS-150
Бренд: Rena Страницы: 59
Gainscha GA-S300 User Manual preview
GA-S300
Бренд: Gainscha Страницы: 12
Xerox 8860MFPD - Multifunction Inkjet Printer Evaluator Manual preview
8860MFPD - Multifunction Inkjet Printer
Бренд: Xerox Страницы: 16
SPRT SP-RMT11/L21 User Manual preview
SP-RMT11/L21
Бренд: SPRT Страницы: 15
Lexmark Color Jetprinter 1020 Service Manual preview
Color Jetprinter 1020
Бренд: Lexmark Страницы: 4
POS Tablet Star TSP 143 Setup And Instruction Manual preview
Star TSP 143
Бренд: POS Tablet Страницы: 4
Oki B2520 MFP Guia Do Usuário preview
B2520 MFP
Бренд: Oki Страницы: 76
TallyGenicom 9050N - Quick Start Manual preview
9050N -
Бренд: TallyGenicom Страницы: 208

Бренды по названию

Популярные бренды

Загрузить еще бренды