Sharp FO-3800M, Руководство по обслуживанию

Страница: 98 / 180

4. FAX simulations
A. Entering the FAX simulation mode
There are following two ways of entering the Fax simulation mode. They differ only in the key sequence and the operations of the simulation are
the same in either mode.
For key operations in the FAX simulation mode, use the LCD display and the FAX panel.
During Fax operations, the Fax simulation cannot be entered.
(1) From the FAX panel
Procedure Procedure Position Operation
1 Press FUNCTION, 9,
∗
, 8, #, 7. Fax Panel ROM version is displayed on the LCD.
2 Press ENTER. Fax Panel FAX enters the simulation mode.
The machine is in the normal display.
3 Press
←
/
→
proper times. Fax Panel Each mode name is displayed on the LCD sequentially.
4 Press ENTER. Fax Panel The mode is determined.
5 Procedure in each mode Fax Panel Operations in each mode
Instead of above procedures 3 and 4, press the code (2 digits) of the target mode to enter the mode directly.
(2) From the COPIER panel
Procedure Procedure Position Operation
1 Press Clear, Exposure, Clear,
Exposure. Copier Panel Waiting for simulation code.
FAX is in the normal display.
2 Enter the main code of 66 with
10Up/1Up keys. Copier Panel “66” is displayed on 7SEG LED.
3 Press START key. Copier Panel The machine exits the simulation mode, and the FAX enters the
simulation mode.
4 Press
←
/
→
proper times. Fax Panel Each mode name is displayed on the LCD sequentially.
5 Press ENTER. Fax Panel The mode is determined.
6 Procedure in each mode Fax Panel Operations in each mode
Instead of above procedures 4 and 5, press the code number (2 digits) of the target mode to enter the mode directly.
B. List of functions
Mode
#
Mode Details of functions
LCD display
(Mode name)
01 Soft switch setting
mode This mode is used to change the soft switch setup. The available soft switches
are SW1 to SW30. The contents of soft switches are backed up.
For details of soft switches, refer to “Software Switch for FAX.” 01:SOFT SWITCH
02 Soft switch clear
mode (Only the
setup is cleared.) This mode is used to reset the soft switch setup (including the user option setup)
to the default.
Since, however, some of soft switches have the adjustment values, the area for
the adjustment values is excluded from the targets. 02:SOFT SW CLEAR
03 ROM & RAM
check mode This mode is used to perform ROM check sum and RAM read/write test.
The result is shown with the buzzer and the LCD.
No error: NO ERROR/ No buzzer
ROM error
: ROM ERROR / Buzzer once
RAM error : RAM ERROR / Buzzer twice
03:ROM/RAM CHECK
04 Signal send mode This mode is used to send various signals to the line. The FAX signal is sent in
the level set with the soft switch.
There are the following kinds of signals: 04:SIGNAL SEND
1 No signal ( OFF HOOK state)
2 DTMF (0,1,2,3,4,5,6,7,8,9,
∗
,#)
3 14400 bps (V.17) (00000000b, 11111111b, 01010101b)
4 12000 bps (V.17) (00000000b, 11111111b, 01010101b)
5 9600 bps (V.17) (00000000b, 11111111b, 01010101b)
6 7200 bps (V.17) (00000000b, 11111111b, 01010101b)
7 9600 bps (V.29) (00000000b, 11111111b, 01010101b)
8 7200 bps (V.29) (00000000b, 11111111b, 01010101b)
9 4800 bps (V27ter) (00000000b, 11111111b, 01010101b)
10 2400 bps (V27ter) (00000000b, 11111111b, 01010101b)
11 300 bps (FLAG) (00000000b, 11111111b, 01010101b)
12 2100 Hz (CED)
13 1100 Hz (CNG)
FO-3800M
8 – 16