Sharp FO-3800M, Руководство по обслуживанию

Страница: 62 / 180

Error
Paper size error
Operation mode
During FAX data
output The output is interrupted and the paper
size error is displayed on the FAX side
LCD. The received data are store din
memory. When the proper paper is
loaded, printing is resumed
Other jobs Enable
Error
Scanner PSF jam
Operation mode
During scan/preview
•
Scanning of document is interrupted
and the jam LED blinks.
•
After removing the jam, the job is
cancelled and resumed.
During print data
output, FAX data
output, direct reception
•
The output job is continued.
(13) Pre-heat mode, shut off mode
operations
(Note)
Memory
Your machine has a memory area that can be used to store both
incoming and outgoing originals.
•
Approximately 120 pages of average content can be held in
memory for transmission.
Less can be held if any of the pages were scanned using fine or
superfine resolution.
Memory Backup
•
The machine uses a lithium-ion battery to keep automatic dialing
numbers and other programmed data in memory when the power
is turned off (when the machine is unplugged). Battery power is
consumed primarily when the power is turned off. With the power
kept continuously off, the life of the battery is about 5 years. If the
battery life expires, have your dealer or retailer replace it. Do not
try to replace it yourself.
Substitute Reception into Memory
This is a back-up function that is automatically activated if your fax
runs out of paper, the TD cartridge needs replacement (See the
copier operation manual.), or the paper jams.
The message "FAX RCVD IN MEMORY" will only appear in the dis-
play at the time the original is initially received into memory. After
reception is complete, one of the following messages, "PAPER
OUT(XXX)," "CAN NOT PRINT," or "PAPER JAM" will appear in the
display. When you add paper (and set the paper size), replace the TD
cartridge, or clear the jam, the stored originals will automatically be
printed out.
•
If you received originals in memory because the fax ran out of
paper, be sure to add paper which is the same size as the paper
previously used. If not, the original print-out size may not match the
size of the printing paper.
Caution!
•
If originals received in memory are lost due to a power failure or
other interruption in the power supply, a POWER FAIL REPORT
will be printed out when the power is restored. This gives available
information about the faxes lost, including the fax numbers of the
transmitting machines.
(14) Others
a. Void area function
A void area is provided in the main scanning direction and in the sub
scanning direction to prevent against dirt on the transfer roller by
toner.
b. Special function of the key
When the clear key is kept pressing for 5 sec or more, the total copy
(print) counter value is displayed.
Specified time (T2)
Auto shut off mode
Specified
time (T2)
Any key including those on
the FAX panel (The functions
of the keys are enabled.)
Setting documents in the SPF
Print data reception
FAX data reception
Data output start
Scanning
Pre-heat mode
Specified time (Y2)
Ready mode
Resetting
START key (The START
key function is disabled.)
Any key on the FAX panel
Setting documents on the
SPF (FAX model only)
Print data reception
FAX data printing
Scanning
Off-hook of the external
telephone
No key operation
No job generating
Not in the simulation mode.
Not in a service call error
Not in cover open
Not in a jam error
No drum replacement
(CRU model) occurred.
No external telephone is used.
(In the preheat mode, however,
shift is made even during use
of the external telephone.)
Shifting conditions: Time until the machine enters the pre-heat mode.
(Set with the user program.)
Time until the machine enters the shut off mode.
(Set with the user program.)
T1:
T2:
FO-3800M
6 – 6