Sharp FO-3800M, Руководство по обслуживанию

Страница: 31 / 180

Readme
The latest information on the printer driver and the TWAIN
driver is included in this note. Read the Readme first.
Status Monitor HELP
Status Monitor
The printer state and information on current printing are dis-
played on the status monitor window. When printing starts,
the status monitor screen will appear on the computer dis-
play.
Uninstall FO-3800M
The printer driver and the TWAIN driver can be uninstalled.
If the drivers are uninstalled, printing and scanning cannot be
performed on the machine.
NOTE:
•
Be sure to read "Readme" found in the printer driver group
before starting to print or scan from application programs.
•
If you uninstall the printer driver, the TWAIN driver is
uninstalled at the same time.
(3) Using other installed drivers
If you use another GDI printer or Windows Printing Systems printer,
including the SHARP AL-800 series and AL-1000 series, interference
between printers may occur and printing may not be performed
properly.
To use another GDI printer or a Windows Printing System printer, you
must change the port setting of the printer driver using the following
procedure.
NOTE: If another printer does not operate properly when the FO-
3800M printer driver is set to "FILE", uninstall the FO-3800M
printer driver.
To uninstall the driver, see UNINSTALLING PRINTER
DRIVER on page 23.
If after uninstalling the FO-3800M printer driver, the printer
still does not operate properly, reinstall the printer driver you
are using.
a. Windows 95/Windows 98/Windows NT 4.0:
1) Click the Start button.
2) Select Settings and then click Printers.
3) Right-click the FO-3800M icon in the printer dialog box and then
click Properties.
NOTE: For this description, it is assumed that the mouse is con-
figured for right hand operation.
4) Click the Details tab (Ports tab – on Windows NT4.0) in the
Properties dialog box, select FILE: in the Print to the following port
list box, and click the OK button.
5) Right-click the icon of the printer to be used and click Properties.
6) Click the Details tab (Ports tab – on Windows NT4.0) in the
Properties window, select LPT1 (or the currently used port), and
click the OK button.
NOTE: To use the FO-3800M again, perform the same procedure
but select the port to be used (for example, LPT1) in step 4.
b. Windows 3.1x:
1) Double-click the Control Panel icon in the Main window of Pro-
gram Manager.
2) Double-click the Printers icon. The Printers window will then open.
3) Select FO-3800M, and then click the Connect button.
4) Select File from the list of options in the Ports window, and then
click the OK button.
5) Select the new printer you would like to use from the list in the
Installed Printers window, and then click the Connect button.
6) Select the printer port to use for the new printer, and then click the
OK button.
7) Click the Set As Default Printer button, and then click the Close
button.
NOTE: To use the FO-3800M again, perform the same procedure
but select the port to be used (for example, LPT1) in step 4.
(4) Uninstalling drivers
If the printer driver and TWAIN driver are not installed correctly or if
you no longer use this machine, uninstall the printer driver and
TWAIN driver from your computer using the following procedure.
1) If using Windows 95/Windows 98/Windows NT 4.0, click Start,
Program, SHARP FO-3800M, and Uninstall FO-3800M.
If using Windows 3.1x, double-click the SHARP FO-3800M icon in
Program Manager and double-click the Uninstall FO-3800M icon.
2) When the "Confirm File Deletion" window appears, click the Yes
button.
3) When the "Remove Programs From Your Computer" window ap-
pears, click the OK button.
NOTE: The printer driver and the TWAIN driver are uninstalled at the
same time.
6. Setup FAX section
A. Connecting the Telephone Line Cord
Plug one end of the telephone line cord into the jack on the machine
marked "LINE."
Plug the other side into a standard (RJ11C) single-line telephone wall
jack. Be sure not to plug this telephone line cord into the "TEL" jack.
The "TEL jack" is used to attach an extension telephone or answering
machine to the machine.
Note: If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the
power and telephone lines.
B. Connecting Other Devices
If desired, an answering machine or external telephone can be con-
nected to the machine through the telephone jack, labeled TEL, on
the rear of the machine.
•
Connecting an answering machine to the machine allows you to
receive both voice and fax messages when you are out. To use
this feature, first change the outgoing message of your answering
machine, and then set the reception mode of the machine to
"A.M." (Answering Machine mode) when you go out.
Note: If you are using distinctive ringing with an answering machine,
you do not need to follow the procedure described below.
(Please note that when distinctive ringing is used, the answer-
ing machine must be distinctive ring compatible.)
The outgoing message of your answering machine should be
changed to inform callers who want to send a fax to press their FAX
START key.
Comments:
1. It is advisable to keep the length of the message under 10
seconds. If it is too long, you may have difficulty receiving faxes
sent by automatic dialing.
2. Your callers can even leave a voice message and send a fax
message on the same call. Modify your outgoing message to
explain that this can be done by pressing their FAX START key
after leaving their voice message.
LINE
TEL
FO-3800M
4 – 6